Bilanciai DD1050, Operation, Maintenance And Installation Manual

Page: 20 / 112

20
DD1050
3.1 Installation
CAUTION
This terminal must be installed indoors, sheltered from the weather conditions, since it has not
been designed to withstand inclement weather.
3.1.1 Table installation
Position the terminal on a fixed surface (table or desk without wheels). To prevent reflections,
make sure that the monitor is not in the direct light, that it is stable and securely standing on
its non-slip feet.
3.2 Connection of the terminal to the electricity main
3.2.1 Inspections
DANGER
Check that:
• The voltage and frequency of the electricity main correspond to the indications on the warning
plate affixed to the terminal.
• The power socket to which the terminal is connected is equipped with an earth.
• The warning and danger plates are affixed to the casing enclosing the instrument.
• Failing this, notify your maintenance personnel or contact our Assistance Service directly.
The power cable has IP20 protection degree. Prepare an adequately protected connection to the
electricity main to suit the environmental conditions.
WARNING
The terminal complies with the European Directive governing electromagnetic compatibility,
however it is good practice to provide a separate power supply line for the terminal.
WARNING
Do not route the terminal connection cables alongside power cables as these could cause interference
that could prevent the terminal from operating in the correct way. Only use the connection cable
supplied with the terminal. If the cable supplied is too short, do not attach an extension lead but
contact the Manufacturer.
DANGER
Insert the plugs and only power the terminal after all the other connections to any peripheral
equipment used (scale, printer, serial ports, Ethernet, I/O, etc...) have been made.