Bilanciai DD1050 Operation, Maintenance And Installation Manual Download Page 34

Page: 34 / 112

DD1050

5.1.8 Status bar

The status bar, comprising messages from the system, icons and indications, is displayed at the

bottom:

Status messages

Brief descriptions about the current operating status.

Key

Access level and password settings.

Help key

Click for immediate access to a help text.

Time

Click to correct the date and time.

5.1.9 Menu

Key for accessing the settings menu (MENU)

Click to enter the parameters (see paragraph 5.3 on page 35).

5.1.10 Reprint

Reprint key

Click to reprint the last ticket printed.

5.1.11 Logo

Logo key

Click to display information about the software.

5.2 Scale Test window

•  Enable high resolution
•  Error codes
•  Internal point display
•  In the case of Scale Test with digital load cells, click on the number of load cells to obtain the

corresponding information

Summary of Contents for DD1050

















































































































Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands

Bilanciai DD1050, Operation, Maintenance And Installation Manual

Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands