Bilanciai DD1050 Operation, Maintenance And Installation Manual Download Page 95

Page: 95 / 112

DD1050

field:

Alias scale (param_ScaleAlias).

> Mnemonic name to assign to the scale, e.g. Scale A or B, etc.
Default Value: []; Type: String, Length MAX: 20

9.32 CbMainWeight.ConfigPrint.ConfigSchema.xml

Plugin: PluginCbMainWeight

Schema: ConfigSchema

Component Name:

Printers - (CbMainWeight.ConfigPrint)

Category:

- (UseMode)

SubPath:

Common configuration - (RESOURCE::CbMainWeight.param_CommonConfiguration)

field:

Main printer node (param_MainPrinterNodo).

> Indicates the network node. The terminal used is indicated with localhost. Select node from

pop-up list.

Default Value: [localhost]; Type: String, Length MAX: 20

field:

Main printer alias (param_MainPrinterAlias).

> Mnemonic name to assign to the printer.
Default Value: [myPrint]; Type: String, Length MAX: 20

field:

Scondary printer node (param_SecondaryPrinterNodo).

> Indicates the network node. The terminal used is indicated with localhost. Select node from

pop-up list.

Default Value: [localhost]; Type: String, Length MAX: 20

field:

Secondary printer alias (param_SecondaryPrinterAlias).

> Mnemonic name to assign to the printer.
Default Value: [myPrint]; Type: String, Length MAX: 20

field:

Totals printer node (param_TotalPrinterNodo).

> Indicates the network node. The terminal used is indicated with localhost. Select node from

pop-up list.

Default Value: [localhost]; Type: String, Length MAX: 20

field:

Totals printer alias (param_TotalPrinterAlias).

> Mnemonic name to assign to the printer.
Default Value: [myPrint]; Type: String, Length MAX: 20

Summary of Contents for DD1050

















































































































Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands

Bilanciai DD1050, Operation, Maintenance And Installation Manual

Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands