Bilanciai DD1050 Operation, Maintenance And Installation Manual Download Page 79

Page: 79 / 112

DD1050

field:

Exit layout\nSecondary printer (param_SecondaryLayoutOuput).

> Name of the file containing the description of the layout of the data on the printed ticket in

relation to the exit weight. The exit printout gives the entrance data. The number indicates

the maximum length of the file name in characters.

Default Value: [RcAInputOutput.xml]; Type: String, Length MAX: 30

field:

ADR total layout (param_RcATotalLayout).

> Name of file containing the description of the data layout on the printed ticket. The number

indicates the maximum length of the file name in characters.

Default Value: [RcATotal.xml]; Type: String, Length MAX: 30

field:

ADR archive layout (param_RcAArchiveLayout).

> Name of file containing the description of the data layout on the printed ticket. The number

indicates the maximum length of the file name in characters.

Default Value: [RcAArchive.xml]; Type: String, Length MAX: 30

9.9 CbDoubleWeight.ConfigRcD.ConfigSchema.xml

Plugin: PluginCbDoubleWeight

Schema: ConfigSchema

Component Name:

RcD - (CbDoubleWeight.ConfigRcD)

Category:

- (UseMode)

SubPath:

Functions::Double Weight - (RESOURCE::CbDoubleWeight.param_FunzDp)

field:

Operation Type (param_OperationType).

> Select operation type
Default Value: [val_RcD]
•

Disabled (val_Disabilitato)

•

RcD (val_RcD)

> Recall data

•

RcDPlate (val_RcDTarga)

> Recall data with Plate

field:

RcD Archive enabled (param_ArchivioRcD).

> Allows the RcD codes archive (Data Recall) to be enabled. An AdR code with weight, date, time

and progressive number is created after weighing. The product, client, plate and conversion

coefficient data can be added to this.

Default Value: [val_Abilitato]
•

Enabled (val_Abilitato)

•

Disabled (val_Disabilitato)

field:

Enable Printout\nwith RCD Plate (param_AbilitationPrint).

Default Value: [true]; Type: Bool
•

true

•

false

field:

Input Copies (param_NumeroCopieIngresso).

> Number of tickets printed after the entrance weight.
Default Value: [0]; Type: Int

Summary of Contents for DD1050

















































































































Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands

Bilanciai DD1050, Operation, Maintenance And Installation Manual

Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands