Bilanciai DD1050 Operation, Maintenance And Installation Manual Download Page 33

Page: 33 / 112

DD1050

5.1.5 Weight indications

The weight is displayed by a number followed by the unit of measurement:

Unit of measurement of the weight displayed

If the indication flashes, the weight is within the minimum weight range.

The following values are indicated if there has been an error:

- 01 -

999999,99

Without unit of measurement

= Overload

- ***,** kg

Weight preceded by the “-” sign (minus) = Scale in negative status

5.1.6 Current data table

The fields with the descriptions of the current weight are given in the table on the left. To scroll

through the fields, either select them or use the positioning keys of the column alongside:

Start

Jump to beginning of table.

End

Jump to end of table.

Pg Up

Scroll one page back through the table.

Pg Dn

Scroll one page forwards through the table.

Scroll one element back.

End

Scroll one element forward.

5.1.7 Operation

The icons for the operating modes appear in the box on the right.
The indication below the icon shows the corresponding archive:

• RcD

• RPD

• AdR

Summary of Contents for DD1050

















































































































Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands

Bilanciai DD1050, Operation, Maintenance And Installation Manual

Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands