
35
DD1050
5.3 Parameter customising window
5.3.1 General information
This window is accessed by pressing the
“MENU”
key (paragraph 5.1.9 on
The icons for accessing the parameters are grouped in the main box.
5.3.2 Keys
Key for accessing the archives customising function (ARCHIVES)
Accesses the window where the archives can be customised (see paragraph 5.4 on page 36).
Key for accessing the totals customising function (TOTALS)
Accesses the window where the totals can be customised (see paragraph 5.5 on page 37).
Key for accessing the miscellaneous parameters customising function (VARIOUS)
Accesses the window where miscellaneous parameters can be customised.
Key for accessing the weighing parameters customising function (SETUP)
Accesses the window where the weighing parameters can be customised (see paragraph 5.6 on
Key for displaying the metrological information (METROLOGICAL INFO)
The SW code of the scale board is indicated along with the revision index and the counter with
the number of accesses to the parameters (see paragraph 5.7 on page 38).
5.3.3 Exit key
Exit
Goes back to the main weighing window (see paragraph 5.1 on page 31).
Summary of Contents for DD1050
Page 1: ......
Page 2: ......
Page 57: ...57 DD1050 8 PROGRAMMING DIALOGUES VIA SERIAL LINKS SEE COMMUNICATIONS MANUAL ...
Page 96: ...96 DD1050 ...