Bilanciai DD1050, Operation, Maintenance And Installation Manual

Page: 31 / 112

31
DD1050
5 USE Of THE TERMINAL
5.1 Main window for the double weighing mode
5.1.1 General information
The main window contains all the basic information for the weighing operations.
Press the “touch screen” with a finger to select the functions.
Do not use pens or other pointed tools as they could damage the screen.
A touch screen pen can also be used so long as its tip is not too pointed.
Do not exercise too much pressure.
5.1.2 Metrological keys
Weight reset key
Press this key to reset the weight indication, but only in the following conditions:
• The weight value must be within the -1% to +3% of the terminal's capacity if metric verification
is obligatory and ± 50% of the capacity for other sorts of terminal.
• The weight must be stable.
• No tare must have been entered.
Tare entry and cancellation key
Press this key to acquire the weight on the weighing platform as the tare value, but only in the
following conditions:
• The weight must be stable.
• The weight value must be positive.
• The weight must not exceed the maximum capacity.
Press again to cancel the acquired tare.
Tare display key
Press this key to display the tare setting.
Printing and/or transmission enabling key
Press this key to print the weighing data and/or for serial transmission of a string of data through
the configured port.