manualshive.com logo in svg

bergmann ALPHA-PACK-BIN, Operating Instructions Manual, Page: 55 / 98

Share
Download
bergmann ALPHA-PACK-BIN Operating Instructions Manual Download Page 55

11.   Maintenance  and  Care

11.

 01

11.1

General

The use of  appropriate grade materials ensure that the machine will give many years of  service.

Nevertheless maintenance and repairs are necessary and these works have to be carried out on time and
with the necessary care.
This applies especially for maintenance after the first hours of operation because otherwise possible
guarantees will not be valid.

You will find a list of  the necessary jobs in the following.

All maintenance and repair works may only be carried out by qualified personnel
with corresponding know how.
It is absolutely necessary to consider the safety instructions in Chapter 3.

If  no appropriate personnel is at your disposal, our company or one of  our service partners will be glad
to help you.

In order to preserve the efficiency and reliability in service of  your BERGMANN - machine, we would
recommend annual maintenance by our company or by one of  our service partners.

Summary of Contents for ALPHA-PACK-BIN



































































































Reviews:

No comments