bergmann ALPHA-PACK-BIN, Operating Instructions Manual

Page: 12 / 98

3. Principle safety considerations
3.
04
* All handles, steps, railings, pedestals, platforms and ladders must be kept free of soiling, snow
and ice.
* The safety and danger instructions on the machine have to be kept in a legible condition and
must be replaced if necessary.
* Operation of the PACK-BIN in publicly accessible areas such as market places etc. is only allowed
under supervision of the operator. If the machine is not under supervision, it is necessary to
secure the main switch by means of a padlock. If the machine is equipped with a cover hood over
the filling opening, this hood must be closed and also secured with a lock. The keys to these locks
must be kept in a safe place.
* PACK-BINs which are equipped with four transport rollers must be secured in such a way that
inadvertent rolling is prevented.
* The pick-up hook at the discharge opening is used as a shunting and maneuvering aid only.
* If the machine is pulled onto the transport vehicle by means of the pick-up hook the projecting
end of the PACK-BIN on the collection vehicle must not exceed half of the machine length.
* The locking of the PACK-BIN on the tipper vehicle must be carried out according to the
instructions of the vehicle manufacturer. The driver is to ensure that the machine was correctly
locked.
* When releasing the discharge opening and emptying the PACK-BIN it is prohibited to stand
behind the discharge opening.
* After emptying the box the discharge opening must be locked safely again.
* If the machine is operated with an integrated LIFT-TILT DEVICE, the movement range of
the machine incl. container should be marked on the floor.
3.2.3 Safety installations
Faultless function of the safety installations must be checked each time before beginning work.
Main switch Main switch in
OFF
position switches the machine off and all
poles are disconnected. Switching on the machine is not possible.
(See chapter 6.6)
EMERGENCY STOP EMERGENCY STOP EMERGENCY STOP EMERGENCY STOP EMERGENCY STOP
buttons If one of the
EMERGENCY STOP
buttons is pressed, the machine
is switched off. (see chap. 5.1)
3.2.4 Hazards through electrical energy
* During works at the machines, the 5 safety rules must be adhered to:
- Activating,
- securing against accidentally being switched back on,
- checking for no current,
- earthing and short-circuiting,
- Cover or fence off adjacent parts which are live.
* Repairs or maintenance on the electrical supply system may be carried out by qualified electrician
only.