bergmann ALPHA-PACK-BIN, Operating Instructions Manual

Page: 35 / 98

7. The additional equipment
7.1 The covering hood
A lid can be mounted in order to prevent the
penetration of rain water into the compaction
chamber.
It is available in several versions.
When you open the lid, please
always save it by means of the
support rods.
When you close it, no person
may be in the press or within
swivel area of the lid.
If the lock is provided with a padlock the unit
can be secured against unauthorised use.
The PRESS-BOX can be equipped with additional devices on request. These will
be optionally adjusted to the machine.
You will find the exact equipment of your machine on our order confirmation
and on the delivery note.
7.2 Switch mechanism for container lock
As an alternative to the function “Container
opening” (point 6.8) the hydraulic valve can
be equipped with an oil-pressure switch for
the option “Container closing”.
This switch causes the compaction piston to
stop below the breaking edge when the
machine is switched off.
This switching only works when the compac-
tion process is finished automatically, i.e. after
the operating time has ended.
7.
01
The cover over the inlet opening must be locked in the open position during the
compaction process. Other-wise a special cover must be applied which is approved by
the manufacturer.
During the transport it must be closed and secured by means of the toggle-lock.
Breaking edge of the
compaction chamber
Compacting
piston