bergmann ALPHA-PACK-BIN, Operating Instructions Manual

Page: 26 / 98

5. Operation
5.
06
5.4 Emptying the machine with a pendulum-type flap
1) When the PACK-BIN is full, it can be trans-
ported by means of a roller tipper and then be
emptied.
To pick up the BOX, a suspension hook is
attached to the front side of the machine.
The suspension hook on the
unloading door is only used for
manoeuvring.
The projecting end of the
PACK-BIN on the collection
vehicle must not exceed half of
the machine length.
The locking on the transport vehicle must be
carried out according to the instructions of
the vehicle manufacturer.
The driver is to ensure that the
machine was correctly locked.
2) For safety reasons the discharge
opening may only be opened if
the machine stands on the
trans-port vehicle.
A ratchet lever (1) and two toggle closures (2)
are used as the door lock.
The following applies when
opening the pendulum-type
flap: first toggle, then ratchet.
The door can be opened and closed through
the back and forth swing movement of the
crank arm (3).
It is prohibited to stay behind
the discharge opening.
3 1 2