bergmann ALPHA-PACK-BIN, Operating Instructions Manual

Page: 51 / 98

9. Technical Data
9.
01
Machine type
APB 616 - SN / 15 SN / 18 SN / 20 SN / 23
Capacity [m³/yd³
]
14,6/19.1 17,5/22.9 20,3/26.6 23,0/30.1
Forward cycle 34 sec. (20 sec. - with double pump)
Return cycle 36 sec. (21 sec. - with double pump)
Force of pressure of the
cylinder approx. [kN/tons
] 314/35,3 346/38,9 346/38,9 346/38,9
Force of pressure of the
piston max. [N/cm²/psi
]
23,3/33,1 25,6/36,4 25,6/36,4 25,6/36,4
Max. carrying capacity [kg/lbs ] 6000/13228 7200/15873 8000/17637 9200/20283
Machine width max. 2500 mm (98,43”)
Machine height approx. 2573 mm (101,30”)
Machine length approx.[mm/inch
]
6235 (245,5”) 6835 (269,1”) 7435 (292,7”) 8035 (316,3”)
Loading aperture max. 2000x1920 mm (top)(78,7”x75,6”), 2000x1200 (below)(78,7”x47,2”)
Loading height approx. 1565 mm (61,61”)
Net weight [kg/lbs
]
5080/11200 5450/12015 5830/12853 6200/13669
Net weight with cover [kg/lbs ] 5220/11508 5590/12324 5970/13162 6340/13977
Power 5,5 kW (7,38 HP)
Speed electric motor 1500 min -1
Power supply Rubber sheathed cable to specification H07 RN-F
CEE - plug 5 x 32 A (clockwise rotation)
Input voltage 220-240 V / 380-415 V ( depending on local supply - see label
on the machine )
Frequency 50 Hz
Control voltage 24 V
Main fuse (by user) 3 x 25 A (in case of a time-lag fuse and a stable power connection,
16 A is sufficient)
Degree of protection IP 44 as per DIN EN 60 529
Noise level 65 dB(A) under full load / 70 dB(A) in neutral
Displacement single pump 14 cm³/rev. (0,85 cu.in./rev.)
Operating pressure up to [bar/psi ] 200/2845 220/3129 220/3129 220/3129
Amount of hydraulic oil total 92 litres (20,2 galUK) (24,3 galUS)
Hydraulic oil HLP as per DIN 51 524, part 2
viscosity of 32 mm²/s at 40°C (0,05 sq.in./s at 104°F)
temperature range : - 5°C to +60°C (23°F to 140°F)
All information is based on theoretical calculations / values.