bergmann ALPHA-PACK-BIN, Operating Instructions Manual

Page: 39 / 98

7. The additional equipment
7.5.1.1 The automatic lid opener (optional)
Optionally, your PRESS-BOX with integrated HUP-TILTING-DEVICE can be equipped with an automatic
lid opener.
Depending on the equipment, that will be activated by means of one or two push rods.
That must be mounted during the commissioning.
Proceed as follows:
1) If the voltages are compatible, you can connect the PRESS-BOX to the power supply.
2) Turn the main power switch in the ON position.
3) Unlock both EMERGENCY STOP buttons by turning them to the right and start the machine.
4) Activate both push-buttons LOWER at the same
time until the HUP-TILTING-DEVICE is moved
downwards.
The operator of the HUP-TILTING-
DEVICE must assure that there is no
person within the danger zone.
Residing on or below the lifted
HUP-TILTING-DEVICE and the lid is
prohibited.
5) Loosen the laterally mounted push rod from the
machine by eliminating the spring cotter pin and
take out the rod.
6) Fasten the push rod at the bolt at the tilting frame
and at the hood and secure them with the help of
the spring cotter pin. Take care that the spring
cotter pins are correctly mounted.
Without a correctly mounted push rod, the PRESS-BOX may not be operated.
It must be checked prior the each use.
7.
05