Bentone B 70i-3R FAME J, Assembly, Installation And Maintenance Instructions

Page: 63 / 112

63
Bentone
10.5.10 The parameters below may need to be set
according to the nature of the installation.
10.5.10.1 No-flame positions air actuator
502 No-flame positions air actuator
Index 0 = no-load position
Index 1 = pre purge position
Index 2 = post purge position
Factory settings marked with bald text.
!
This manual describes “2=valve
proving via pressure switch-min
(between fuel valves 1 and 2)”
type burners.
!
Depending on the type of burner,
the automatic control unit should
be set to either “0=no valve
proving” or “1=valve proving on
startup”.
! The automatic control unit should
be set to “Index 0 = no-load
position”.
!
The automatic control unit should
be set to “Index 0 = no-load
position”.