Bentone B 70i-3R FAME J, Assembly, Installation And Maintenance Instructions

Page: 55 / 112

55
Bentone
Curvepoint Meaning Valve
P0 Point of ignition (not approached in the operating
position) V1
P1 Stage 1 V1
P2on Switch-on point stage 2. When the angle exceeds this
point, the fuel valve for the second stage is switched on V1
P2_d Presetting of point P2 with no approach V1
P2 Stage 2 V2
P2of Switch-off point stage 2. When the angle falls below this
point, the fuel valve for the second stage is switched off V2
P3on Switch-on point stage 3. When the angle exceeds this
point, the fuel valve for the third stage is switched on V2
P3_d Presetting of point P3 with no approach V2
P3 Stage 3 V3
P3of Switch-off point stage 3. When the angle falls below this
point, the fuel valve for the third stage is switched off V3
The actuator positions can be set with a resolution of 0.1°, the speeds with a
resolution of 0.1%.
10.5.2 Traveling speed
The air actuator or the VSD is operated like outside the operating position.
The defined ramp speeds are used.
The speed of the VSD can be adjusted separately for speed increase or
decrease.
No Parameter
522 Ramp up
523 523 Ramp down
The setting also acts outside the operating position.
The running speed of the actuators is fixed at 5 seconds for a positioning
angle of 90° for SQM33.4, SQM33.5, and SQN1.
The speed is 10 seconds for a positioning angle of 90° for SQM33.6.
The SQM33.7 requires 17 seconds for a positioning angle of 90°.
Kurvpunkt
P0
P1
P2on
P2_d
P2
P2of
P3on
P3_d
P3
P3of