BENSHAW RSi SG Series, Instruction Manual

Page: 214 / 218

Appendix C – Declaration of Conformity
vi
TECHNICAL STANDARDS APPLIED
The standards applied in order to comply with the essential requirements of the Directives 73/23/CEE "Electrical
material intended to be used with certain limits of voltage" and 89/336/CEE "Electromagnetic Compatibility" are
the following ones:
• EN 50178 (1997) “Electronic equipment for use in power installations”.
• EN 61800-3/A11 (2000) “Adjustable speed electrical power drive systems. Part 3: EMC product
standard including specific methods”
• EN 55011/A2 (2002) “Industrial, scientific and medical (ISM) radio-frequency equipment. Radio
disturbances characteristics. Limits and methods of measurement”
• EN 61000-4-2/A2 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement
techniques. Section 2: Electrostatic discharge immunity test.
• EN 61000-4-3/A2 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement
techniques. Section 3: Radiated, radiofrequency, electromagnetic field
immunity test.
• EN 61000-4-4/A2 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement
techniques. Section 4: Electrical fast transients / burst immunity test.
• EN 61000-4-5/A1 (2000) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement
techniques. Section 5: Surge immunity test.
• EN 61000-4-6/A1 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement
techniques. Section 6: Immunity to conducted disturbances, induced by radio-
frequency fields.
• CEI/TR 61000-2-1 (1990) “Electromagnetic compatibility (EMC). Part 2: Environment. Environment
description for low-frequency conducted disturbances and signalling in public
low voltages supply systems”
• EN 61000-2-4 (1997) “Electromagnetic compatibility (EMC). Part 2: Environment. Compatibility
level in industrial plants for low-frequency conducted disturbances”
• EN 60146-1-1/A1 (1997) “Semiconductor converters. General requirements and line commutated
converters. Part 1-1: Specifications of basic requirements”