Bennett CNG Spec. 100 Series, Operator'S Manual

Page: 48 / 58

Bennett CNG Spec.100 Series Operators Manual Diagnostics
42
0.1 DESIGN TYPE
The PPM display shows the dispenser is in Diagnostics Level 0.1 as shown in Figure 5.1 .
1. Design type 8 is standard for alternative fuel dispensers. It means the dispenser is an
“819 CPU design” computer.
2. Press [ ENTER ] to move to the next level of Diagnostic Code 0.
0.2 SOFTWARE RELEASE NUMBER
The software release number is the current level of software installed in the dispenser. The PPM display shows the dispenser is in
Diagnostics Level 0.2.
1. After Enter was pressed in the previous level, the next level of Diagnostic Code 0 is
displayed.
2. The current level of software installed in the dispenser will be displayed as shown in
Figure 5.2. Note: Software levels will change from version to version.
3. Press [ ENTER ] to move to the next level of Diagnostic Code 0.
4. Press the [ CANCEL ] button to exit this code.
5. Press the [ CANCEL ] button twice to exit Diagnostics.
0.3 819 SOFTWARE I.D. NUMBER
The software id number identifies the 819 software revision level installed in the dispenser. The PPM display shows the dispenser is in
Diagnostics Level 0.3.
1. After Enter was pressed in the previous level, the next level of Diagnostic Code 0 is
displayed.
2. The current level of the 819 software revision will be displayed as shown in Figure
5.2 . Note: This will change from software version to software version.
3. Press [ ENTER ] to move from one level to another of Diagnostics Code 0.
4. Press the [ CANCEL ] button to exit this code.
5. Press the [ CANCEL ] button twice to exit Diagnostics.
FIGURE 5.1 – DESIGN TYPE
FIGURE 5.2 – SOFTWARE RELEASE
FIGURE 5.3 – 819 SOFTWARE ID
Sale $
design
GGE
Type 8
diag --0.1
Sale $
soft
GGE Rel 0.02
Diag --0.2
Sale $
819 id
GGE 02.04.011
Diag --0.3