Bennett CNG Spec. 100 Series Operators Manual
Operation
12
MENU CODE 2 - HOW TO READ ELECTRO-MECHANICAL TOTALS
Menu Code 2 allows the operator and/or manager read the Electronic Mechanical Totals. If the operator or manager did not enter a
different value in Menu Code 5, this total should be the same as the dispenser electro-mechanical totalizers.
TO READ THE ELECTRON IC TOTALIZER TOTALS , FOLLOW THIS PROCEDURE:
1.
Press the
2
button and then the [
MODE
] button on the keypad.
a.
The main display shows the electro-mechanical total as shown in
Figure 3.9
.
b.
The total number is carried to three decimal places.
c.
The PPM display reads
T1.2
for Product 1 Electro-Mechanical Totalizer,
Menu Code 2.
2.
To read the totals for the remaining meters, press the [
ENTER
] button.
Note:
See
How to Read Electronic Totals with a Magnetic Reed Switch
for instructions on
reading Menu Code 2 totals.
FIGURE 3.9 – PRODUCT 2 ELECTRO-MECHANICAL TOTAL
Sale $
056
GGE
7890.12
t1.2
---1
Menu 2
T1 =
Totalizer 1 Meter Totals
- - 1
= Side 1
Summary of Contents for CNG Spec. 100 Series
Page 3: ...Bennett CNG Spec 100 Series Operators Manual Bennett Limited Warranty i...
Page 4: ...Bennett CNG Spec 100 Series Operators Manual ii Page Intentionally Left Blank...
Page 46: ...Bennett CNG Spec 100 Series Operators Manual Programming 40 Page Intentionally Left Blank...
Page 56: ...Bennett CNG Spec 100 Series Operators Manual Diagnostics 50 Page Intentionally Left Blank...
