BendPak Autostacker PL-6SR, Installation And Operation Manual

Page: 44 / 104

Autostacker™ Parking Lift
44
P/N 5900002 — Rev. D — August 2019
3. To use that Safety Lock, keep pressing Up for another half a second, then release Up .
4. Press
Down
for a few seconds; the Lock Hood moves into a locked position on the Lock Block it
just passed.
The Lock Hood is securely on the Lock
Block.
5. If you miss the desired Safety Lock, there’s no problem; just try it again until you get it right.
Parking a Vehicle Under Autostacker
This section describes how to park a Vehicle under the Autostacker Platform.
To park a Vehicle under the Platform :
1. Check the height of the Vehicle against the amount of space that is available under the
Autostacker Platform; there needs to be enough space to accommodate the height of the Vehicle.
2. If necessary, raise the Autostacker Platform to a higher Safety Lock.
If the Autostacker Platform is already on the highest Safety Lock, and there still is not enough
space available,
you cannot park that particular Vehicle under the Autostacker
Platform.
If desired, lower the Vehicle’s antenna and fold in any side mirrors.
3. Drive the Vehicle into the center of the space under the Autostacker Platform.
4. Put the Vehicle in park, put on the parking brake, and turn off the Vehicle.
If the Vehicle is a manual transmission, put it into first gear before turning off the Vehicle.
5. Open the car door(s) carefully, making sure not to bang the door against the Autostacker Legs.
Although the Autostacker comes with Patented Door-sentry™ car door protectors, you should
always carefully open the car doors when exiting a Vehicle parked underneath the Platform.
6. Exit the Vehicle, taking care not to bump your head on the Autostacker Platform or trip over the
Autostacker Bases.
7. To get the parked Vehicle back out again, simply reverse this process.