2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of Husqvarna 4421 XL Soft Door Kit
HU-4421-XL-SDK01
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.
Be sure to read these instructions thoroughly before opening and installing. The installation is best done
when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro, if conditions
prevent installing in warmer weather it helps to store the adhesive Velcro at room temperature prior to
installation.
1.
Carefully open the carton and remove the rolled up Cab Enclosure on a large flat surface that is clean
and free of dirt or other material that may soil or scratch the windows of the Cab.
2.
Check over the parts included in the carton with the parts list shown below:
Velcro Hook strips: 32 each
3” long
“ “ “
2 each
9” long
“ “ “
2 each
15” long
“ “ “
2 each
16” long
Snap studs
16 each (2 extra)
Soft Doors
2 each
If any parts are damaged or missing please contact customer service at (606) 845-7439.
3.
Begin by placing the two 40” adhesive strips on the rear bars facing the rear of the vehicle. Start at the
bottom and work your way up the bar. See Photo Below.
