Belmont CP-ONE PLUS, Operating Instructions Manual

Page: 57 / 96

Unit part
53
Automatic operation settings of chair
* Refer to the manual of the Chair part.

Presetting
Manual switch
Preset switch
1. Move the chair to the intended examination
position with the manual switch.
2. Hold the preset switch or for
approximately 5 seconds when the
examination position is determined. The
buzzer of the chair generates a “beep” sound
and the setting is completed.
3. Carry out operations 1 and 2 indicated above
to change the set position.

Setting of last position
Manual switch
Last position switch
1. Move the chair to the intended examination
position with the manual switch.
2. Hold the last position switch for
approximately 5 seconds when the gargle
position is determined. The buzzer of the chair
generates a “beep” sound and the setting is
completed.
3. Carry out operations 1 and 2 indicated above
to change the set position.

Setting of patient’s up-and-down position
Automatic chair return switch
1. Move the chair to the intended examination
position with the manual switch.
2. Hold the automatic chair return switch
for approximately 5 seconds when the patient
getting off position is determined. The buzzer
of the chair generates a “beep” sound and the
setting is completed.
3. Carry out operations 1 and 2 indicated above
to change the set position.
OPERATION SETTING