Belmont CP-ONE PLUS, Operating Instructions Manual

Page: 11 / 96

Chair part
7

Caution Points during Operation of the Product
Description of Symbol Marks
Caution areas (Moving parts should be the attention)
Description of attention areas
①
Take care not to be trapped by moving parts
of the headrest.
Do not allow hands, fingers, or hair to
become entangled in the moving parts of the
headrest.
②
Take care not to be trapped by moving parts
of the backrest.
Do not put hands or feet into the gap between
the backrest and the seat.
③
Take care not to be trapped by the armrest.
Do not put hands into the gap between tops
and bottoms of the armrest.
④
Take care not to be trapped by the lower part
of the seat.
Do not put hands or feet into the gap in the
lower part of the seat.
⑤
Take care not to be trapped by the lower part
of the legrest.
Do not put your feet under the legrest.
⑥
Take care not to be trapped by the lower part
of the flange cover and main link cover
Do not put your feet under the flange cover
and main link cover
Shock less movement
This product is equipped with shock less-less function that enables it start and stop smoothly.
Warm-up mode
This product, being controlled by hydraulic pressure, may cause the variance of its stopping position
according to oil temperature and/or patient’s weight.
To minimize such variance of stopping positions, it is equipped with WARM-UP MODE which is
automatically activated as soon as the main switch is turned on, if the oil temperature is too low.
During the WARM-UP MODE operation, the alarming beep will sound for three (3) minutes.
If you want to stop the WARM-UP MODE operation, activate any one of switches that control the chair
movement.(i.e. auto switch, chair manual switch, preset switch)
SAFETY PRECAUTIONS
NOTICE