Belmont CP-ONE PLUS, Operating Instructions Manual, Page: 18 / 96

Chair part
14

Examining position adjustment
Operating panel switch (membrane switch) of doctor table
1.
In case the stick switch of chair auto operation (optional) is included.
To memorize the headrest position is not available.
* The raising angle of legrest is automatically determined by the reclining position of backrest when the
auto operating switch is set up.
Please refer to the “Positional relation between backrest and legrest, rollup” for details.
2.
Please setup by the Operating panel switch (membrane switch) of doctor table if the Stick switch
of chair auto operation is not optional.
AUTO OPERATING SWITCH ADJUSTMENT
Stick switch of chair auto operation Stick switch of chair manual operation
Chair last positioning switch Chair auto return switch
Chair preset switch Chair manual switch
1. Operate by the stick switch of chair manual operation to set up chair height and reclining
angle of backrest.
(The chair manual switch in doctor table operating panel is also available.)
2. Upon deciding of the desired direction (either
①
or
②
), keep pressing the stick switch
of chair auto operation until buzzer sounds.(in about 5 seconds).
3. Release the stick switch if the buzzer sounds for setting completion.
1. Operate by the stick switch of chair auto operation to set up chair height and reclining angle
of backrest.
2. Upon deciding of the desired direction either
①
or
②
, keep pressing the stick switch of
chair auto operation until buzzer sounds.(in about 5seconds).Release the stick switch if the
buzzer sounds for setting completion.
3. Release the stick switch if the buzzer sounds for setting completion.