Belmont CP-ONE PLUS, Operating Instructions Manual

Page: 84 / 96

Unit part
80

Storage method
Strictly observe the following points when the product will not be used for a long period of time
(following the completion of work, during the suspension of business, etc.).
1. Main switch
▪ Be sure to turn off the main switch at the end of each work day . (To stop supply of air, water,
electric power, etc.)
▪ Strictly observe this instruction to prevent water leakage and electric accidents.
2. Water main valve
▪ Be sure to turn the main water valve counterclockwise to the Close position at the end of each
work day.
▪ Strictly observe this instruction to prevent water leakage accidents.
3. Water master valve
▪ Turn the water master valve clockwise to the Close position if the product is not used for a long
time for suspension of business.
4. Air master valve
▪ Turn the air master valve clockwise to the Close position if the product is not used for a long time
for suspension of business.
5. Main gas valve
▪ Be sure to turn off the gas main at the end of each work day. Strictly observe the instruction to
prevent gas leakage accidents.
6. Be sure to open the compressor breaker and then discharge air from the compressor. (Be sure to
turn off the power.)
7. Be sure to turn off the vacuum pump breaker. (Be sure to turn off the power.)
8. Be sure to turn off the equipment breaker on the clinic’s electrical panel. (Be sure to turn off the
power.)

Procedure for storage of the chair
Make sure to carry out works of items described below, when it is anticipated that the chair will not be
used for a long period of time for recess or the like.
1. Make sure that the chair must be lowest position and to limit reclining position for the backrest.
2.
Disconnect the power plug of chair or turn off the equipment circuit breaker in examination room.
STORAGE/DURABLE PERIOD/HOLDING OF
PARTS/DISPOSAL/RESTRICTION ON USE