Belmont CP-ONE PLUS, Operating Instructions Manual, Page: 83 / 96

Unit part
79
Check the following parts first before requesting repair services, if the following phenomena take place.
Phenomenon Cause Countermeasure
Product does not work at
all.
Main switch has not been turned on. Turn on the main switch.
Power of the compressor has not been turned
on.
Turn on the power.
Equipment breaker in the clinic has not been
turned on.
Turn on the equipment breaker.
The chair does not operate.
Locking device for stopping operation is
activated.
Release the lock. See page 47.
No water flows out.
Main water valve is closed. Open main water valve.
Water quantity adjust valve or knob of
handpiece, etc., is closed.
Open valve or knob.
No water is fed to cup.
(Weight detecting type)
Cup of less than 3 g is used. Use a paper cup weighing 3 g or more.
Vacuum suction is not
executed.
Power of the vacuum pump has not been
turned on.
Turn on the power.
Solid collector filter is contaminated. Clean the filter.
Vacuum handpiece filter is contaminated. Clean the filter.
Saliva ejector does not
suck.
Saliva ejector filter is contaminated. Clean the filter.
Check the above and take the proper countermeasures. If the equipment still fails to work normally, stop
using it, turn off the main switch and contact the dealer or our company.
BEFORE REQUESTING REPAIR SERVICES