Belmont CP-ONE PLUS, Operating Instructions Manual

Page: 36 / 96

Unit part
32
Doctor’s unit

Instrument holder
▪ Two types of instrument holders are available:
Holder type and place type.
▪ The holder type and place type have the same
insert ports at the top, which may be detached
and replaced with each other.
▪ Attach the holder along the groove so that the
arrow at the top is adjusted to the arrow at the
root.
▪ Turn the top cover counterclockwise to detach.
▪ It is also possible to detach the holder sleeve and
must be used the proper one according to the
instrument type.
▪ The holder sleeves have the letters L, M and S on
the back.(No letter on LL sleeve)
LL: Holder sleeve for 77 syringe, DCI syringe
L: Holder sleeve for Faro syringe
M: Holder sleeve for turbine, motor
(MC3, TIM-40J, EM-6E/7E, MX2)
S: Holder sleeve for scaler
LUZZANI syringe,Intraoral camera
SI: Holder sleeve for motor
(NLX PLUS, NLX nano, MX)
▪ The instrument holder may be rotated to the right
/left and up/down.
▪ To rotate to the right and left, pull down the
instrument holder and rotate it. The instrument
holder is fixed at two positions.
▪ The raise angle of the instrument holder may be
adjusted at five positions. To raise the instrument
holder, hold it and move it up. To lower the
instrument holder, hold the lock lever behind the
holder to unlock the holder and move it down.
CAUTION
Be sure to unlock the holder with the lock lever
to move the holder down.
The instrument holder may break if it is moved
down without unlocking it.
■
Recommended angle of the place holder
OPERATING INSTRUCTIONS
Recommended holder angle
Place Type
Holder Type
The place type should use the
holder angle in 1 or 2positions
only.
Do not use the angle of a place
holder in 3 to 5 positions.
The holder type can be used at
all holder angle 1 to 5 positions.
CAUTION
In use of a place type holder, set the holder
angle in 1 or 2 positions only within
recommended positions.
If set the holder angle at 3 to 5 positions, the
sensor of holder will cause malfunction during
an operation and the handpiece will not work
properly.
Place type
Top cover
Holder type
Top cover
Holder body
Holder sleeve
Holder sleeve(S)
Holder sleeve(SI)
Holder sleeve(M)
Holder sleeve(L)
Holder sleeve (LL)
Groove
Arrow at top
Arrow at
the root
Rotation to the right
and left
Rotate by pulling down the holder
Up/down rotation
Press the lock lever and move
it down.
Press and hold the
lock lever