Belmont CP-ONE PLUS, Operating Instructions Manual, Page: 15 / 96

Chair part
11

Chair auto operation (Preset switch operation)
OPERATING INSTRUCTIONS (Optional)
Stick switch of chair auto operation
(Multiple choice)
Momentarily depress
1
the auto mode stick
switch to left side, the chair will move to the
preset-1 position automatically.
Momentarily depress
2
the auto mode stick
switch to right side, the chair will move to the
preset-2 position automatically.
Momentarily depress
LP
the auto mode stick
switch upward while in the reclined backrest
position (treatment position), the backrest will
raise to the mouth rinsing position
automatically.
Momentarily depress
0
the auto mode stick
switch downward, the chair will return to the
initial position.
*Momentarily depress the auto mode stick switch
upward again the backrest will be reclined to the
previous treatment position automatically.
*Immediately release any auto mode stick switches
after depressing them, because when any auto
mode stick switches are depressed about five
seconds, the chair position will be set up to preset
with buzzer sound.
Refer to the “Setting of auto operation switch” for
the setting of each position.
*After depressing “0” to return the chair to its
initial position, depress “0” again to return the
headrest to its initial position.

Before moving the chair, confirm that the patient is placing in a normal position, and never
leave the patient unsupervised while the chair is in motion.

Before moving the chair, confirm that there are no children around chair.
Please also keep children away from this product during off- medical examination.

Before moving the chair, confirm that there is no obstacle around it.

Before moving the chair, confirm that there is no obstacle between the base and flange
cover, main link cover.
CAUTION