Belmont CP-ONE PLUS, Operating Instructions Manual, Page: 56 / 96

Unit part
52
Operation and functions of the dental light

900 dental light (Type AL-920)
1. Main switch and operation switch
▪ When the main switch of the dental unit is turned on, the indicator shown in the figure is lit in green and
the dental light power is turned on.
▪ The dental light may be turned on and off with the touchless switch or the dental light switch on
the operation panel of the unit side.
2. Turning on and off of the light by the touch-less switch
The dental light turned on when you shake your hand within approximately 65 mm from the touchless
switch surface. It goes out when you shake your hand again.
If the surface of a touchless switch becomes unclean, this may affect the sensitivity of the sensor.
Please wipe the surface of a touchless switch with a soft cloth.
3. Intensity control volume
It can adjust intensity between 4,000 ~ 32,000lx by stepless intensity control volume
4. Changing into composite mode
The indicator begins to blink in green and the mode changes to the composite mode, when you hold
your hand within 65mm from the touchless switch for 2 seconds or keep pressing dental light switch
on the operation panel for 2 seconds. The indicator is lit in green and the mode changes to the normal
treatment mode, when you leave your hand once and hold it above the switch again for 2 seconds or
keep pressing dental light switch on the operation panel for 2 seconds.
*When the light is turned off in the composite mode, it goes on in the normal treatment mode when it is
turned on again.
OPERATING INSTRUCTIONS