Belmont CP-ONE PLUS, Operating Instructions Manual

Page: 44 / 96

Unit part
40
Doctor’s unit

Operation and display of the electric scaler

Setting mode
▪ When the scaler is removed from the holder, the
selected mode of PERIO, ENDO and SCALING
is displayed on the indicator. Use
on the
operation panel to select and change the mode.
The EMS scaler does not have this selection
mode and
operation is disabled.

Adjusting power with foot controller
▪ The scaler power may be adjusted by sliding the
foot controller pedal to the clockwise and
counterclockwise.
The power is maximized when the pedal is slid to
the right end. A bar graph and the power level are
displayed on the indicator before operation starts.
Power cannot be adjusted during operation, Stop
operation once and adjust power.
▪ See page 41 for adjusting the output of the foot
controller.

Adjusting power with the operation panel
▪ When the page feed button
is pressed on the
water feeding quantity adjustment screen, the
screen changes to the screen with the Fix switch.
When the Fix switch is pressed, Fix is displayed
on the right of the bar graph and the output
varied by sliding the foot controller is fixed.
Press the page return switch twice and adjust
power with the and switches on the
power adjustment screen.
When the Fix switch is pressed again, Fix
disappears and power may be adjusted by sliding
the foot controller.
▪ Adjust the water quantity of the turbine in the
same manner as the micromotor.
NOTICE
Before use, be sure to carefully read the package inserts and Instruction Manuals included with the
scalers to ensure proper use.
Power
Bar graph
OPERATING INSTRUCTIONS
S-4055N
S-4055N
S-4055N
S-4055N
S-4055N