Belmont CP-ONE PLUS, Operating Instructions Manual, Page: 30 / 96

Unit part
26
Doctor's unit

Chair/headrest manual switches
▪ These switches provide manual operation for
elevating/lowering and reclining/raising of the
chair/headrest. Pressing will allow the change-over
between the chair and the headrest. When the headrest
is selected, the LEDs located around these switches
light up.
Pressing will move the chair/headrest up.
Pressing will move the chair/headrest down.
Pressing will recline the backrest/headrest.
Pressing will return the backrest/headrest.

Chair presetting switches
▪ Pressing either of these switches will move the chair to
the preset height and the backrest to the preset angle. To
interrupt the movement of the chair, press either of the
chair switches.

Chair automatic return switch
▪ Pressing this switch will lower the chair to the initial
position and raise the backrest.
To interrupt the movement of the chair, press either of
the chair switches.
▪ When the chair is in the initial position and the headrest
is raised or tilted forward, pressing this switch will
automatically lower and recline the headrest for 10
seconds.

Chair last position switch
▪ Pressing this switch with the chair in the treatment
position moves the chair to the rinsing position and
another press of this switch returns the chair to the
original fine-tuned treatment position.
▪ When the spittoon bowl LP interlocking operation is set
with motor-driven spittoon bowl turning (optional), the
spittoon bowl automatically moves in and out at the
rinsing position in combination with LP operation.
CAUTION
Be careful that the stool will not be caught in the gap between the chair and the headrest when the chair is
operated with an auto-switch. Damage to the backrest, stool or Doctor's table may occur. Confirm that the
patient is seated in the proper position before operation of the chair and keep your eyes on the patient
during operation.
OPERATING INSTRUCTIONS