manualshive.com logo in svg

BELGACOM Forum 520, User Manual

Share
Download
BELGACOM Forum 520 User Manual Download Page 87

Main Menu

83

Features and MenuCards

Main Menu

MenuCard “Main menu”

This MenuCard contains all available features. Some of the menu 
items can be found in other MenuCards as well. For example, 
incoming e-mails are located under 

Messages

 in the main menu 

and can also be called up by way of the Info key 

 (if it has 

been configured accordingly). Features that affect the availability 
of your telephone (e.g. active call protection) can be found in the 
main menu and also in the MenuCard 

Activeƒfeatures

, which 

you can call by pressing and holding the Info key down 

.

The main menu is also used to program features on a key.

Press and 

hold

 the MenuCard key 

 down or, if the telephone 

is idle, press (but do not hold down) the MenuCard key 

 and 

select the menu item 

Mainƒmenu

. This displays the primary groups 

of menus …

1 Calls

: This contains the most important features relevant to a 

call.

2 ƒCall forwarding

: This menu group contains all the types of 

call forwarding you can programme on your telephone. Please 
keep in mind the explanations in the chapter 

Forwarding Calls

 

starting on page 63.

3 Messages

: This menu group provides information about short 

messages and e-mails that you have received and sent. You can 
also configure appointments and activate pre-defined messages 
(

“

Presence

”

 function).

4 Phone settings

: In this menu group you can configure your 

telephone to meet your personal requirements (e.g. volume, 
ringer settings, and display contrast).

5 Protection

: Among other things, you can activate the call pro-

tection or the telephone lock.

6 Connections

: This menu group provides you with all the fea-

tures that can affect a call. Depending on the particular state, 
these features are also displayed in the MenuCards that you can 
call during a connection.

Summary of Contents for Forum 520





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands