BELGACOM Forum 520 User Manual Download Page 19

Page: 19 / 132

Add-ons

System Telephones on the Forum 500 / Forum 5000

listening/hands-free volume of the second telephone. The feed
power can be increased by connecting an external AC adapter (2).

Note:

adapters on the communications system can only be

operated on telephones directly connected to the system. A U

adapter is not permitted on a second telephone.

a/b Adapter

Using an a/b adapter, you can connect analogue telephones to the
Forum Phone 520 and Forum Phone 530 system telephones.

Technical Data

Dialling mode: DTMF

CLIP is not supported on connected analogue telephones.

Charge impulses are not transmitted, and charges are
therefore not displayed on analogue telephones.

Notes on Connecting a/b Adapters

The connection of an a/b adapter exceeds the feed power of the
U

port (3 W), regardless of the range. For this reason you also

have to connect a power supply to the a/b adapter.

Note:

Use the power supply with the part number 900 263 33!

You can connect

one

a/b adapter to a Forum Phone 520 or a

Forum phone 530.

You can connect one a/b adapter

and

one U

adapter to a

Forum Phone 530. On the telephone connected via the U

adapter, a Forum Phone 520 for example,

a/b adapter can be

operated.

If you combine an Forum Phone 530 via an a/b adapter and a U

adapter with two other telephones (i.e. three telephones alto-
gether), you can make calls on a maximum of two of them
simultaneously.

CLIP = Calling Line Identification Presentation: Displays the tel-
ephone number of the caller.

Summary of Contents for Forum 520





































































































































Search results

Summary of Contents for Forum 520

Reviews:

Related manuals for Forum 520

Brands by name

Popular brands

BELGACOM Forum 520, User Manual

Search results

Summary of Contents for Forum 520

Reviews:

Related manuals for Forum 520

Brands by name

Popular brands