manualshive.com logo in svg

BELGACOM Forum 520, User Manual

Share
Download
BELGACOM Forum 520 User Manual Download Page 80

Programming the Call Keys

76

Team Functions

volume set for that telephone (see the section entitled 

MenuCard 

“Phone Settings”

 on page 92). 

Calls from direct-call keys to your telephone are signalled acousti-
cally even if you have programmed a substitute (unless you have 
programmed call protection for this trunk key).

4ƒCall signalling

: Determine whether call signalling to this key 

is to be 

Opticalƒ&ƒacoustic

, 

Optical only

 or 

Acoustic after 

delay

. If you select 

Acoustic after delay

, specify the number 

of seconds after which your telephone is to ring.

5ƒCall protect

: Switch call protection 

On

 or 

Off

 for all calls, for 

internal calls only, or for external calls only. If call protection has 
been activated, this trunk key will only indicate calls by means of 
a visual signal, even if they are made from a direct-call key.

6ƒRing tone

: You can set the 

Volume

 and 

Melody

 for different 

types of incoming calls (

1ƒExternal calls

, 

2ƒInternal calls

, 

3ƒVIP call

, 

4ƒDoor call

) for each trunk key. Proceed as 

described in the section “2 Ring Tone” on page 92. 

7ƒCharges

: For each trunk key, you can view the charges for the 

last call as well as the total charges.

8ƒCall wait. prot.

: While you are making a call, other calls for 

the telephone number of this trunk key are not signalled by a call 
waiting tone. The caller hears the busy tone.

Note:

If the internal telephone number of this trunk key is config-

ured on several telephones, call-waiting protection is also acti-
vated on these telephones.

9ƒAnnouncement pro...

 (Announcement protection): Switching 

on (

On

) or switching off (

Off

) announcement protection for this 

trunk key. When announcement protection is activated, no 
announcements can be made to your telephone (see also 
page 60). 

0ƒLists

: Define if for the call number of this trunk key the caller 

lists (missed calls and accepted calls) and the redial list are 
recorded. Use 

On

/

Off

 to activate/deactivate the lists for this trunk 

key.

Summary of Contents for Forum 520





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands