manualshive.com logo in svg

BELGACOM Forum 520, User Manual

Share
Download
BELGACOM Forum 520 User Manual Download Page 64

Special Calls/Functions

60

Making Calls

Special Calls/Functions

Accepting an Appointment Call

You can save appointments with the menu item 

3ƒAppointments

 

in the MenuCard 

Messages

.

At the appropriate time, the appointment message appears on the 
display and your telephone rings for a period of one minute with 
the ringer volume steadily increasing. Press the OK key 

 

once to switch the ringer signal off. Press 

 again to acknowl-

edge the display signal. If you lift the handset during an appoint-
ment call, a special tone (through the handset) indicates that the 
ringer signal was an appointment call. You can also end the 
appointment call with the 

 key or by lifting the handset. 

Elapsed and active appointment calls are displayed in the 

Info

 

MenuCard.

Baby Call

You can save an internal or external telephone number in the 
menu item 

4ƒBaby call

 of the MenuCard 

Protection

. If the 

menu item has been activated, this programmed telephone 
number is dialled when a specified period has expired (presetting 
is five seconds after you have lifted the handset. If you begin dial-
ling a telephone number within the specified period, the baby call 
is cancelled. The baby call can also be triggered by pressing the 
hands-free key 

 or a call key 

. 

Your system administrator configures the baby call period from 0 
to 20 seconds for all subscribers on the Forum 500 / Forum 5000, 
and will be able to tell you the current value.

Announcements (with and without 

Intercom)

Announcements can only be made to system terminals. For you to 
be able to use this function, the system administrator must set up 
the corresponding authorisation for you. Announcements can be 
set up on single or multiple system terminals. The “Announce-
ment” function is available in two versions.

Summary of Contents for Forum 520





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands