manualshive.com logo in svg

BELGACOM Forum 520, User Manual

Share
Download
BELGACOM Forum 520 User Manual Download Page 66

Special Calls/Functions

62

Making Calls

Responding to an Announcement

If you receive an announcement yourself, you will hear a special 
information tone. 

… for an announcement without intercom

That function requires that your user group has to have 
“Announcement accept” authorisation granted by your system 
administrator.

H

/

To respond, lift the handset or press the hands-free/

open-listening key.

or:

Briefly

 press the MenuCard key. Select 

Accept

 in the Men-

uCard 

Announcement

. 

… for an announcement with intercom

Your telephone switches to the hands-free mode when it receives 
the announcement. You can speak with the caller immediately. 

Note:

When you have activated announcement protection (see 

page 95) and/or intercom protection (see page 97) on your sys-
tem telephone, announcements to your call number will not be 
carried out.

Rejecting an Announcement

In the MenuCard 

Announcement

, select 

Reject

 if you want to 

reject the announcement call. The subscriber making the 
announcement then hears the busy tone.

You can also reject the announcement by pressing the disconnect 
key 

 or a feature key on which you have programmed the 

Reject

 function. You can also reject an announcement call with 

Announcement with intercom 

by pressing the hands-free/

open-listening key.

Answering a Callback

A callback request is executed when the other subscriber is free 
again. When you hear the signal on your telephone, you…

H

 lift the handset, and the other subscriber will be called.

Summary of Contents for Forum 520





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands