manualshive.com logo in svg

BELGACOM Forum 520, User Manual

Share
Download
BELGACOM Forum 520 User Manual Download Page 24

Key Assignments

20

System Telephones on the Forum 500 / Forum 5000

Redial Key

Pressing this key opens a MenuCard containing a list of the 

last-dialled numbers.

Enquiry Key

This is used to initiate an enquiry call.

Hands-Free/Open-Listening Key

This key (which has an LED) lets you make calls using the 

microphone and/or loudspeaker. The illuminated LED of the key 
indicates that hands-free telephoning is activated. The LED 
flashes when open-listening is activated.  

Disconnect Key

Pressing this key ends the current call.

Muting Key

This key (which has an LED) deactivates the microphone. 

The ringer of your telephone can be switched off for incoming calls 
over the muting key. 

C Key

A short press of this key deletes input or list entries in the 

menu. Pressing and holding the key deletes a complete entry or a 
list, e.g. the call list.

Plus/Minus Key

The functions of this key depend on the device’s current 

status:

z

It adjusts the volume during open-listening/hands-free mode.

z

It adjusts the volume when making a call via the handset.

z

It adjusts the volume of the ringer tone during a call.

Summary of Contents for Forum 520





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands