manualshive.com logo in svg

BELGACOM Forum 520, User Manual

Share
Download
BELGACOM Forum 520 User Manual Download Page 17

Add-ons

13

System Telephones on the Forum 500 / Forum 5000

z

Forum Phone 520 and Forum Phone 530 can each be 
expanded by various types of external 

audio equipment

, e.g. 

a headset or an external active speaker.
Connection is via an audio adapter.
Please refer to the chapter entitled 

External Audio Devices

 

starting on page 32.

The operating range of such add-ons depends on the maximum 
power of the U

pn

 interface of the communications system, and on 

the power consumption of the respective equipment. The range 
can be increased by the deployment of secondary AC adapters. 
For the relevant technical details and a complete overview of the 
various equipment combinations that you can configure, please 
refer to the chapter entitled “Accessories and Adapters” in the 
“Mounting and Commissioning” (Forum 523/524, Forum 525/526, 
Forum 550/560) resp. “Commissioning and Maintenance” 
(Forum 5050) user guide. Please also refer to the information on 
the scope of available features in expanded equipment combina-
tions.

Note:

Secondary devices are activated by the communications 

system. The communications system detects whenever there are 
two adapters of the same type on a Forum Phone 530. This is not 
permitted, and for this reason, they are not released for opera-
tion.

CAUTION! Protect your equipment against static dis-
charge!

Static electricity can damage the sensitive components of the 
Forum 500 / Forum 5000. To avoid such damage when connecting 
add-ons, you must first discharge the static electricity from your 
body. Work only in an antistatic environment. If possible, use con-
ducting pads or antistatic mats.

Summary of Contents for Forum 520





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands