60
3.3.23 Hotline Extensions
3.3.24 COLP/R Function
An extension can be programmed so that
when it goes off- hook, it will dial another
extension or an external number.
Depending on the setting selected, the
number will either be dialled immediately or
after a short delay if the user has not
dialled any digits.
To enable a
Hotline
extension -
•
Select the setting from the drop-down
menu alongside the extension number
•
Enter the number to be dia lled in the
Sequence
field
Note
: A Line access code must be entered
for external numbers.
•
Click
Save
to accept new settings
•
Click
Back
to return to the main
menu
Each extension may be programmed so
that the Connected line Presentation is
either enabled (COLP) or restricted (COLR).
For incoming calls to the Forum 300,
Connected Line Presentation (COLP) is a
network service which allows a remote
calling party to receive the identity of the
connected party on the Forum 300. It is not
a confirmation of digits dialled as the
connected party may be different from the
called party (for example, where the
incoming call is diverted).
For incoming calls to the Forum 300,
Connected Line Restriction (COLR)is a
network service which allows the connected
party o n the Forum 300 to prevent
presentation of its ISDN number to a
remote calling party.
The default is that COLP is set at every
extension.
•
Click
Save
to accept new settings
•
Click
Back
to return to the main
menu
