manualshive.com logo in svg

BELGACOM Forum 300, User Manual

Share
Download
BELGACOM Forum 300 User Manual Download Page 18

 

18 

 
 
2.1.5  Terminal Connectors 

The following diagram illustrates the terminal layout of the Forum 300. Note that 
all terminal connectors are located within the Access Area.  

 
 

 
 
 

 
 

 
 
 

 
 

 
 

 
 
 

 
 

 
 
 

 
 

 
 

 
 
 

 
 

 
 
 

 
 

The terminal blocks consist of the following types of connectors: 
 

o 

Cage clamp connectors 

are used for the connection of relay driven devices, 

digital and analogue extensions.  

o 

RJ-45 connectors 

are used for the connection of the ISDN Line and Ethernet 

port for system programming with a PC and browser. 

o 

Phono-Jack connector is

 used for the connection of the external Music-on-

Hold source. 

 

2.1.6  Cage clamp connectors 

To connect the wires to the cage clamp connectors, follow the steps below: 
1.  Insert a non-conducting tool into the groove of cantilever (note that no tool is 

supplied with the system) 

2.  Push cantilever in the direction shown  

3.  Insert bared wire into the aperture  
4.  Release cantilever.  

 

    Ethernet Port for System Programming from a PC and browser 

  Voice Port 11 Digital  
  Voice Port 12 Digital 
  Voice Port 13 Digital 

        Phono jack connector for external Music on Hold source 

ISDN Line Interface

 T1 

Relay RL2 
Relay RL1 

Voice Port 19 Analogue 
Voice Port 20 Analogue 

Voice Port 21 Analogue 
 

Summary of Contents for Forum 300






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands