20
2.2.5 Wallmounting the Forum Phone 320 and Forum Phone 310.
The Forum Phone 320 and the Forum Phone 310 can be either wall or desk
mounted.
To change from desk to wall mounting, the plinth must be removed from the
phone.
To remove the plinth, lift the two retaining clips and gently slide in the direction
shown.
Three screws are needed to support the system phone – these should be
positioned in the keyhole slot at the top of the base and the two slots at the centre
as illustrated below.
A separate wall-mountable handset rest is provided for use when the phone is
wall-mounted. If required, this bracket can be fixed to the wall on the left hand
side of the system phone and used to support the handset when off-hook.
To remove plinth - slide in
direction of arrows
Wall mounting dimensions
Wall mounting
dimensions for
handset rest
