105
KMX-3921
Installation & Service Manual
5 Click
Load Factory
.
A message appears prompting you to confirm your choice.
6 Click
Yes
.
The selected parameters revert to their factory-default configuration.
Card Alarms
Reset all status LED alarm contributions from this card, to their default
configuration.
Network Settings
Revert the
KMX-3921
system IP address, network mask, and gateway
settings to their default values.
Use this for
card A only.
After you reset the network settings for card A,
card B will automatically detect the changes, and reboot to match the
new settings. Attempting to revert the network settings from the
service panel for card B would result in card A immediately restoring
them. For more information about the location of card A and B in the
frame, see
Installation of the KMX-3921 in a Densité 3+ Frame
Select...
To...
