67
KMX-3921
Installation & Service Manual
XEdit Installation
Installing the Kaleido Software Client Applications
In addition to the XAdmin Web client, which does not require installation, the Kaleido
Software includes the following client applications:
• XEdit is a client application used to create layouts for the monitor wall, and to configure
your multiviewer system, from your PC. When this PC has network connectivity to the
multiviewer, you can use XEdit to modify layouts and settings directly on the
multiviewer, or you can work locally on the computer and then export your changes to
the multiviewer.
• If you have only one multiviewer (or if you have more than one but you intend to
always have the same Kaleido Software version on all of them), download the XEdit
installer file from the multiviewer’s home page. Whenever you install a new version of
the Kaleido Software on the multiviewer, the next time you open XEdit, your copy of
the application will be automatically updated from the multiviewer. See
from your Multiviewer’s Home Page
• The Router Control Software Single Bus and Matrix View applications (also part of the
iRouter Router Control Software packaged with iControl Application Servers) can be
used to control your multiviewer’s logical sources and monitor wall destinations, via
the
KX Router
logical router, or to control other logical routers configured within your
multiviewer system. See
• Signal Path Viewer opens as a standalone panel, updated in real time, showing
assignment information between router sources and multiviewer inputs. See
Installing XEdit from your Multiviewer’s Home Page
To install XEdit from your multiviewer’s home page
1 With your PC, open a Web browser window and type the multiviewer’s IP address in the
address bar.
