Belden Grass Valley KMX-3921, Installation & Service Manual, Page: 62 / 156

62
Frame Operation and IP Network Setup
TCP/UDP Port Usage
From iControl to multiviewer
Between multiviewer and remote control panel
The following ports, used for communications to/from RCP-200 and Kaleido-RCP2 control
panels, are open by default on all Kaleido Software systems:
From multiviewer to peripheral devices
7572 UDP On multicast 230.8.8.8 for “keep-alive” (heartbeat)
7571 UDP For “keep-alive” (heartbeat)
Port Used for Transport Notes
4160 Java Jini TCP Responsible for discovery and communications between
devices/services on a network.
32768–
65535 Java RMI TCP Remote Method Invocation (client/server
communication). Dynamic Allocation of ports. Required
for communication between client and Application
Server. This range can be restricted to match specific
security requirements. A minimum of 4000 ports should
be allocated.
Port Used for Transport Notes
5120 RCP2 TCP Used to listen for Kaleido Multiviewer discovery packets
10000 TCP For Kaleido-RCP2 protocol
10001 TCP For Kaleido-RCP2 protocol
5120 UDP On multicast 230.8.8.9 for Kaleido-RCP2 protocol
5121 UDP For Kaleido-RCP2 protocol
80 HTTP TCP Used by the RCP-200 to obtain information from the
multiviewer’s system database
13000 TCP Used by the RCP-200 to control the multiviewer via the
gateway
Port Used for Transport Notes
25 SMTP TCP Simple Mail Transfer Protocol, for e-mail alerts.
8851 AlVelte TCP Used to obtain information from Plura
(AlVelte) Studio Production Timer (SPT)
systems.
5100 GPI-1501 TCP Used to obtain information from GPI-1501 General
Purpose Interface I/O modules.
a
a. See also: From multiviewer to multiviewer , on page 61.
8910
b
TSL (network) TCP Used to obtain information from TSL devices that use
the TSL UMD version 5.0 protocol.
Port Used for Transport Notes