24
Overview
How to Identify a Densité 3+ FR4 Frame’s Controller Model
To find the frame’s controller model by visual inspection
If the frame is unpowered, another way to know if your
Densité 3+ FR4
frame is equipped
with
a CPU-ETH3-ADV advanced frame controller is to visually inspect the rear of the
Densité 3+ FR4
frame and look for the model number of the frame controller’s rear panel,
located at the top center of the
Densité 3+ FR4
frame.
CPU-ETH3 Rear Panel Part
Number
Description
Densité CPU-ETH3-RP
The frame is currently equipped with either a
CPU-ETH3 basic
or a CPU-ETH3-STD standard frame controller.
To know what multiviewer capacity supported is supported by
the frame, you must power the frame and confirm the
CPU-ETH3 controller model through its web interface. See
To find the frame’s controller model in a powered frame
.
Densité 3+ CPU-ETH3-RP-ADV The frame is currently equipped with a
CPU-ETH3-ADV
advanced frame controller.
This Densité 3+ FR4 frame can support KMX-3921
multiviewers with the following capacities: 9 × 1, 9 × 2, 18 × 2,
18 × 4, 27 × 2, 27 × 4, 36 × 2, 36 × 4, 54 × 2, and 54 × 4.
