97
KMX-3921
Installation & Service Manual
The System Configuration page appears, showing the current system name, IP settings,
as well as the date and time settings.
3 Optionally, type a descriptive name for your system to make it readily identifiable.
If there are more than one multiviewer in the same network environment, it is
important to assign each a unique system name, so that you can tell them apart (for
example, when using a remote control panel such as the Kaleido-RCP2 or
RCP-200
).
4 Enter the appropriate IP information: multiviewer card IP addresses, network mask, and
default gateway.
5 Click
Save
.
The new settings are saved locally.
Note:
Only lower-ASCII characters are allowed in the system name. Braces
and tilde are not allowed.
Note:
The date and time settings are configured in the frame. See
.