Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Page: 20 / 128

20
Installation
Frame Physical Interface
• Up to five more dedicated 1000Base-T (or 100Base-T) Ethernet switches for your
Kaleido - IP X320 units equipped with six network adapters to connect to high-
bitrate data streams
• Client PC (see System Requirements for a Client PC , on page 45)
• Cables (to connect your multiviewers to displays, and to the networks):
Frame Physical Interface
When the front cover is removed, the following controls and indicators are available.
For more information about the frame’s controls and indicators, refer to the Supermicro
SuperServer User’s Manual . See
Related Documentation
, on page 15.
Cable type Purpose
CAT-5 For Ethernet connectivity ( Management Network , Media Networks )
Display cables To connect the multiviewer’s HDMI outputs to displays using HDMI
cables or use long-range active cables when more than a short
length is required. Contact Technical Support to purchase long-
range active cables that have been tested to work with this
multiviewer. See Grass Valley Technical Support , on page 128.
DisplayPort
adapters
For converting DisplayPort to HDMI connectivity. Use optional
DisplayPort-to-HDMI passive adapters to support 1080i outputs.
Control Panel
2

USB Ports 10

SAS3/SATA/NVMe Hot-Swap Drive Bays