Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Page: 125 / 128

125
Kaleido - IP X320/X120
Installation & Service Manual
Drivers for Controlling Tally Interface Devices from the Multiviewer
Drivers are available to extend your Kaleido-X system with the ability to control tally
interface devices such as the ones listed in the tables below. Contact your sales
representative for more information.
Drivers for Timers
Built-in Communications Protocols
The multiviewer itself can be controlled by external devices (e.g. Kaleido-RCP2, router
control panels) or applications (e.g. router control software application, Remote Control
Gateway) via built-in communications protocols. Such devices or applications can be used
to command monitor wall operations (e.g. source assignment) or routing operations.
d.For Thomson / Grass Valley Series 7000 devices, our current implementation of the Series 7000
Native Protocol supports some Encore system controller models, which are supported by Ethernet
connection. For other Series 7000 devices you wish to control by Ethernet connection, use the Sony
HKSPC (GVGNP Emulator).
e.Our current implementations of the protocols listed above for Grass Valley (Thomson/Philips)
routers and controllers support neither the CM-4400 nor the CM-4000 system controllers.
Production Switchers
Company Device/System
Grass Valley (Thomson) Kayenne K-Frame, Karrera K-Frame, Zodiak, XtenDD HD/SD series
UMD controllers
Company Protocol Device/System
TSL TSL UMD protocol V5.0 UMD Controller (TCP/IP or UDP/IP)
IP Limitation: only one screen index can be
received per unicast port.
Image Video TSI-1000 Tally System Interface (requires
option from Image Video)
Automation systems
Company Device/System
Sundance Digital Fastbreak NXT Automation (requires option from Sundance
Digital)
Timer systems
Company Device/System
Plura (AlVelte) Studio Production Timer (SPT)