Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Page: 74 / 128

74
System Configuration
Customizing Layouts, Logical Sources, and other Kaleido - IP Elements
8 Press any of the LAYOUT PRESETS buttons to load a predefined layout on the monitor
wall.
If your system was configured prior to shipment, then a layout will appear on all
displays. Otherwise, a gray screen will appear with the following message in the
middle:
“No layout has been assigned to this room. Please load a layout.”
Customizing Layouts, Logical Sources, and other Kaleido - IP
Elements
Refer to the Kaleido Software User Manual to learn how to customize the Kaleido - IP to suit
your specific needs. See Related Documentation , on page 15.
Note:
To access other layouts, press the LOAD button. To assign a layout to
a preset button, press and hold the button for more than six seconds while
the desired layout is showing on the monitor wall.