Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Page: 94 / 128

94
System Configuration
Configuring the Kaleido - IP to use SMPTE ST 2022-6 / 2110 Inputs and ST 2110 Outputs with NMOS
The new settings are saved locally.
5 Click OK .
6 Once a setting change has been saved, the Apply settings button becomes available.
7 Click Apply settings .
The multiviewer must be restarted for changes to the network configuration to take
effect. A message appears prompting you to reboot the system immediately.
8 Click OK .
Your Kaleido - IP restarts.
9 Receivers must be created by creating Virtual Inputs in XEdit. Refer to Virtual Inputs in
the Kaleido Software User’s Manual. See Related Documentation , on page 15.
10 For head streaming, senders are created when a head’s mosaic output is configured to
stream according to the SMPTE ST 2110-20 standard; see Configuring Head Streaming ,
on page 84 for more information.