Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Page: 102 / 128

102
System Configuration
Restarting or Shutting Down the Multiviewer
4 Click Yes to proceed.
For Then
Restart software Your multiviewer’s operating system will shut down, and then start again.
This may take a while.
Once the monitor wall software has restarted, the system notifies you.
Click OK .
The XAdmin Status and Options page appears.
Restart unit Your multiviewer will shut down, and then start again, during which time
you can observe messages associated with the Linux shutdown and boot
sequences on the monitor wall display connected to Head 1. This may take a
while.
Once the multiviewer has restarted, the system notifies you.
Click OK .
The XAdmin Status and Options page appears.
Shutdown Your multiviewer will perform a clean shut down, during which time you can
observe messages associated with the Linux shutdown sequence on the
monitor wall display connected to Head 1.
Click
OK
to continue.